Sitemap

Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: HD141X
Issue: Hello
My projector is 5 years old and just given up after I opened it to clear out dust, which I have done successfully before! When I turn it back on there is a click and the power and lamp LEDs both turn orange and nothing else happens. It's not the bulb as I have tried a new one. Maybe I knocked something inside but I thought I was careful, I'm hoping there's life in it yet. Anyway, let me know if you are able to help and what your process is.
Many thanks
Date: 2021-07-28
Location:
Required Service: Projector Repair
Manufacturer: Epson
Model: EB-X31
Issue: Image has strong yellow cast over 75% of screen - save a block of normal full colour in upper right corner. Different inputs, cables & input sources suffer from same condition.
Date: 2021-05-11
Location:
Required Service: Projector Repair
Manufacturer: Epson
Model: EB-S04
Issue: This projector was exposed to an overvoltage of up to 400volts due to a loss of the neutral at the main supply. I believe the electronic circuitry may be damaged.
Date: 2021-05-18
Location:
Required Service: Projector Repair
Manufacturer: ASK Proxima
Model: STWT
Issue: FGDFGDFGDG
Date: 2021-04-08
Location:
Required Service: Projector Repair
Manufacturer: AAXA Technologies, Other
Model: Picopro
Issue: The led light won't turn on anymore. I can still hear sound but not image.
Date: 29/07/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: 1080gt
Issue: Hi not sure how this works looking for a local shop and on google it says your in Durham but your website says Dublin/London can you please confirm where your located thankyou.
Date: 28/07/2020
Location:
Required Service: Projector Repair
Manufacturer: BenQ
Model: TH681
Issue: I am enquiring about the repair of my colour wheel, and a general cleaning of the inside.
Has sat idle for the last year.

Thanks in advance.
Date: 24/07/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma, Other
Model: Optoma 141x
Issue: Hello. I'm to have my Optoma 141x repaired,the bulb is fine the issue is with the hdmi connections neither input source 1 or 2 pick up on any signal coming in to them..
Date: 06/07/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: Gt1080
Issue: Hi, our Optoma Gt1080 projector wasn't used for a while, then when we got it out again the standby light was permanently on as both blue and red (normally it's just red) and wouldn't turn on. Now the light has permanently gone and it won't do anything! We'd really like it repaired and probably cleaned at the same time if possible
Date: 22/06/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: HD230X
Issue: Our projector started to make a loud buzzing sound recently, and now, when I turn it on from from cold the green light flashes, the buzzing returns and then quickly the fan stops and the temp red light comes on, and the orange on/off light flashes. Any future attempts goes straight to the red light and flashing orange.
Date: 18/06/2020
Location:
Required Service: Projector Repair
Manufacturer: Epson
Model: tw9000 / home cinema 5010
Issue: The projector powers on with lamp lighting but after a few seconds shuts down with fans all on high speed/power. The temp warning light then flashes/blinks continually until switched off.
Seems to be a temp sensor issue that other projector have. I think it the from exhaust from checking with multimeter but don't want to be doing a DIY fix on this,
Any idea of a quote for repair/collection etc. I can bring it to a local centre if required.
Mant thanks.
Date: 15/06/2020
Location:
Required Service: Projector Repair
Manufacturer: BenQ
Model: MP515 ST
Issue: White spots appeared on the screen. Looks very much like the DLP chip may be failing.
Could you give me a quote to replace this and repair projector. Many Thanks.
Date: 01/06/2020
Location:
Required Service: Projector Repair
Manufacturer: BenQ
Model: W1400
Issue: Please would you call me to discuss likely cost and practical considerations of undertaking repair given the current COVID-19 pandemic ? (07572 459 184)

Thanks
Raminder
Date: 28/05/2020
Location:
Required Service: Projector Repair
Manufacturer: Sanyo
Model: PLC-XD2200
Issue: Hi there, i have a Sanyo xd2200 and all of a sudden it wont turn on. The fans kick on as if its starting up for a few seconds then it shuts back off and the warning light comes on. Im on a bit of a tight budget so if i was to send it to yous and yous inspected it but the repair was too expensive could i just get the projector back? And the inspection would still be free? Im not sure if it could be to do with the lamp but i dont want to waste the money on a lamp if thats not the issue
Date: 22/05/2020
Location:
Required Service: Projector Repair
Manufacturer: BenQ
Model: TW526E
Issue: I have a Benq TW526E DLP projector with dust in the lens unit from mistakenly using compressed air to clean the cooling fans. Please quote for repair and give estimated completion date. Thanks, Ben
Date: 11/05/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: EW675UT-EDU
Issue: bULB , FAN AND SWITCH PILOT HAVE NO POWER. CHECKED FUSE it's ok. PLEASE ADVISE ASAP - 2ND MOBILE 07584382470

regulatory model:DAEWLTUUT5 060069 046355
Date: 07/05/2020
Location:
Required Service: Projector Repair
Manufacturer: Acer
Model: p1200
Issue: Pls my projector has white dusts
Date: 08/05/2020
Location:
Required Service: Projector Repair
Manufacturer: Epson
Model: tw 5200
Issue: Is Martin from SW12 8EE in london, I have an Epson projector TW5200 with problem of overheating, is it something you can deal with and do you have availability at this moment. In a positive case can you please let me know how does it work about, collection, delivery, quotation and payment. If you need, I can tell you more about the problem, it might be related to dust cleaning, fan or thermal sensors.
Date: 30/04/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: ML-330
Issue: Hi I purchased this projector last week from CeX. After 15-20mins or so of use the image bleeds green in certain areas, a slight tap or reposition of the unit solves the issue, only temporarily.
I'm being 100% honest now, I want to keep the unit, they will only refund - not replace, hence if the machine is repairable for a reasonable price (I've no idea on costs of these things) I will go ahead and get it fixed.
Many Thanks
Date: 01/05/2020
Location:
Required Service: Projector Repair
Manufacturer: Epson
Model: EH-TW5100
Issue: Hi, My projector suddenly has a vertical blue line and I would like it fixed, Thank you, Joanna
Date: 28/04/2020
Location:
Required Service: Projector Maintenance
Manufacturer: BenQ, Casio, Epson
Model: Various
Issue: Hello,

Please can you quote for an onsite service to include:

Clean
Service if required
Repair if required

Plus any additional info re your services.

This would be for approx 80 to 90 projectors(LED and Lamp) over 2 sites.

Regards

Gary Howell
Barking Abbey School
Assistant ICT Manager
Date: 03/08/2020
Location:
Required Service: Projector Maintenance
Manufacturer: NEC
Model: M402W
Issue: Please can we have a quote?
Date: 18/03/2020
Location:
Required Service: Projector Repair
Manufacturer: Acer
Model: Acer X110P DLP Projector, EMEA
Issue: The projector has white dots on screen. I marked the repair as non-urgent (7-10 days) which should be just enough as I need to have a working projector for the weekend of 7-8 March. If necessary, treat the repair as more urgent to make that deadline or I'll take you up on the replacement projector. Thank you!
Date: 25/02/2020
Location:
Required Service: Projector Repair
Manufacturer: Other
Model: Hitachi CP-X5022WN
Issue: Projector will not power up
Date: 24/02/2020
Location:
Required Service: Projector Repair
Manufacturer: Optoma
Model: HD25x
Issue: Hi there,

I'm trying to find someone local to me who can take a look at my HD25x.

It has been having trouble with the colours and the colour wheel making an aduible whiring whilst the colours flicked.

After air dusting out, it now stays on, but there are veritical black bands down the right portion of the screen.

I'm hoping I've just pushed dust onto the colour wheel or elsewhere in the unit.

Is this something you'd be able to repair and, if so, could you please provide a quotation?

Kind Regards,

Steve
Date: 12/02/2020